Range
| SIZE | Un | In | POLES | MODULES | REFERENCE | |
|---|---|---|---|---|---|---|
WITHOUT INDICATOR |
WITH INDICATOR |
|||||
| 8x32 | 400V AC/DC | 25A | 1P | 1 | 485001 | 485008 |
| 1P + N | 2 | 485003 | 485009 | |||
| 2P | 2 | 485004 | 485010 | |||
| 3P | 3 | 485005 | 485011 | |||
| 3P + N | 4 | 485006 | 485012 | |||
| 4P | 4 | 485007 | 485013 | |||
Technical data
| Rated current | 25A |
| Rated voltage | 400V AC/DC |
| Rated power dissipation | 2,5W |
| Maximum power dissipation | 3W |
| Power dissipation per pole | 80% In 0,16W 100% In 0,25W |
| Utilization category (EN 60947-3) | 400V AC-22B |
| Pollution degree | 3 |
| Protection index * | IP20 |
| Rated impulse withstand voltage | 6kV U imp |
| Ambient temperature of service | -20°C ... 70°C |
| Storage temperature | -40°C ... 80°C |
| * For wires of section ≤ 6mm2 is necessary to use the accessory indicated to guarantee IP20 in clamps zone. | |
Standards
IEC/EN 60269-1
IEC/EN 60269-2
Dimensions
| 1P | N | 1P + N | 2P | 3P | 3P + N | 4P |
| 57gr | 60gr | 117gr | 114gr | 171gr | 231gr | 228gr |
Accessories
Multipolar assembly
Standard system by DF Electric: 3 clips and 1 pin for each union between poles.
| REFERENCE | DESCRIPTION |
| 480005 | Pins for multipole assembly |
| 485050 | Handle ties for multipole assembly |
Identification by label
Open the label holder part with the fuse holder closed, put on the label and close it. Label measures: 11x9mm.
Special IP20 protection
The accessory mut be positioned in the wire entries, if it’s neccesary to achieve the IP20 degree of protection with thin wires.
| REFERENCE | DESCRIPTION |
| 485052 | Special IP20 protection accessory |
Phase separators accessory
The accessory increases the distance between phases in multipolar asemblies.
| REFERENCE | DESCRIPTION |
| 485053 | Phase Separator accessory |
Screws protection accessory
Protection accesory to avoid the screws manipulation and improve the protection degree.
| REFERENCE | DESCRIPTION |
| 485656 | Screws protection accessory |
Screw fixation accessory
First mount the accessory with screws, then mount the fuse holder
(there are available different accessories depending the number of the fuse holder)
Lock of the fuse holder
Systems to avoid the operation and connection when the fuse holder is open or closed.
| REFERENCE | DESCRIPTION |
| 485051 | Lock accessory |
Fusing Indicator replacement instructions
Compatible
 |
 |
|
| 8x32 Cylindrical gG fuse link | 8x32 Cylindrical aM fuse link | |
| U | 400V | 400V |
| In | 0,5A...20A | 1A...10A |
| Breaking capacity | 20kA | 20kA |
Other sizes
 |
 |
 |
|
 |
 |
 |
|
|---|---|---|---|
| U | 690V AC 750V DC |
690V AC 750V DC |
690V AC 750V DC |
| IN | 32A | 50A | 100A |
| Certifications |      |
|
|