Industrial cylindrical fuse holders and bases
Fuse holders and fuse bases provide a secure, correctly rated connection point for cylindrical fuse links and support their integration into electrical panels and equipment.
DF Electric’s industrial cylindrical fuse holders and bases provide the mounting, electrical connection and access needed to integrate cylindrical fuse links into low-voltage equipment. The range includes enclosed DIN-rail holders, compact and multipole configurations, open bases for applications with higher heat dissipation, and clip contacts for Ø10 fuse links.
PME, PMX, PMC Compact, PMX CC and BAC solutions cover control panels, switchboards, OEM equipment, motor-control assemblies and power-electronics systems. Select the holder or base for the fuse-link format, circuit ratings, pole arrangement, indication or monitoring needs, mounting method and installation conditions.
Within the CYLINDRICAL fuse links and fuse holders family, the fuse link provides the protective characteristic; the holder or base provides the correctly rated connection and mounting interface. Both parts must be checked as a complete combination.






PME is an enclosed 10×38 mm holder for straightforward DIN-rail assemblies. Published configurations run from 1P and neutral units to 4P, with ratings of 32 A, 690 V AC and 750 V DC.
| Main function |
|---|
| Mounting and connection of 10×38 cylindrical fuse links |
| Typical applications |
|---|
| Control panels, switchboards and OEM equipment |
| Range |
|---|
| PME 10 × 38 mm |
PMX is the broadest modular holder family, covering 8×32, 10×38, 14×51, 22×58, 22×65 and 20×127 mm. Indicator, microswitch and multipole options depend on the size and reference.
| Main function |
|---|
| Mounting and connection of cylindrical fuse links |
| Typical applications |
|---|
| Industrial switchboards, control panels and monitored circuits |
| Range |
|---|
| 8 × 32 PMX 10 × 38 PMX 14 × 51 PMX 22 × 58 PMX 22 × 65 PMX 20 × 127 PMX |
PMC Compact reduces panel space for 8×32 and 10×38 mm fuse links. It includes single-pole, neutral and multipole configurations, including 1P + N in one module.
| Main function |
|---|
| Compact mounting and connection of cylindrical fuse links |
| Typical applications |
|---|
| Space-constrained control panels and OEM equipment |
| Range |
|---|
| 8 × 32 PMC Compact 10 × 38 PMC Compact |
PMX CC provides a dedicated enclosed holder for cylindrical Class CC fuse links. Published references are rated 30 A and 600 V, with 1P, 2P and 3P versions available with or without a fusing indicator.
| Main function |
|---|
| Mounting and connection of Class CC fuse links |
| Typical applications |
|---|
| 600 V Class CC industrial circuits |
| Range |
|---|
| 1P, 2P and 3P PMX CC With or without fusing indicator |
BAC open bases support DIN-rail or screw fixing and are intended for applications where open mounting assists heat dissipation. Microswitch versions are published for 14×51 and 22×58 mm striker fuse links.
| Main function |
|---|
| Open mounting of cylindrical fuse links |
| Typical applications |
|---|
| Power electronics and high-dissipation assemblies |
| Range |
|---|
| 10 × 38 BAC 14 × 51 BAC 22 × 58 BAC |
Tinned-bronze clip contacts provide an open connection for Ø10 cylindrical gG fuse links. Screw-fixing and PCB versions are listed for equipment-level integration.
| Main function |
|---|
| Equipment-level connection of Ø10 cylindrical fuse links |
| Typical applications |
|---|
| PCB and screw-fixed custom assemblies |
| Range |
|---|
| Screw-fixing clip contacts PCB clip contacts |
Which cylindrical fuse holder or base fits your installation?
Compare fuse-link size, holder or base ratings, pole configuration, mounting, indication and protection degree. The values shown belong to the holder or base; open the product family for dimensions, accessories and exact order references.
Comparison table
DF Electric cylindrical fuse holders and bases
Scroll the table horizontally to compare all families.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
| Feature | PME | PMX | PMC Compact | PMX CC | BAC | Ø10 clips |
|---|---|---|---|---|---|---|
| Format and mounting | Enclosed holder DIN rail |
Enclosed modular holder Two-position DIN rail |
Enclosed compact holder DIN/EN rail |
Enclosed Class CC holder DIN/EN rail |
Open base DIN rail or screw |
Open contacts Screw or PCB |
| Fuse-link size | 10×38 mm | 8×32, 10×38, 14×51, 22×58, 22×65 and 20×127 mm | 8×32 and 10×38 mm | Class CC | 10×38, 14×51 and 22×58 mm | Ø10 mm gG |
| Rated voltage | 690 V AC 750 V DC |
400 V AC/DC to 1500 V AC/DC | 400 or 500 V AC | 600 V | 690 V AC 750 V DC |
Up to 1500 V AC/DC |
| Rated current | 32 A | 25, 32, 50, 63 or 100 A | 25 or 32 A | 30 A | 32, 50 or 100 A | 25 A |
| Pole configuration | 1P, N, 1P + N, 2P, 3P, 3P + N or 4P | Single-pole, neutral and multipole versions by size | 1P, N, 1P + N, 2P, 3P, 3P + N or 4P | 1P, 2P or 3P | 1P | Contact pair |
| Indication or monitoring | Standard holder | Indicator and microswitch options by size and reference | Standard holder | With or without fusing indicator | Microswitch versions for 14×51 and 22×58 mm | Not applicable |
| Protection degree | IP20 | IP20 | IP20 when closed | IP20 | IP00 | Defined by the finished assembly |
| Selection priority | 10×38 mm industrial circuits | Broad size range, multipole layouts and monitoring | Minimum panel space | Class CC installations | Open mounting and heat dissipation | Equipment-level integration |
Applications of cylindrical fuse holders and bases
The holder or base must suit both the electrical duty and the physical arrangement of the equipment. These formats cover enclosed panel mounting, open high-dissipation assemblies and equipment-level integration.
01
Control panels
PME, PMX and PMC Compact holders provide enclosed DIN-rail options for auxiliary, distribution and control circuits. Select the size and pole arrangement required by the panel design.
02
Industrial switchboards
PMX covers a broad range of fuse formats and multipole configurations. Indicator and microswitch versions can support circuit identification and status monitoring where specified.
03
OEM electrical equipment
Compact and modular formats allow the holder to be integrated around the equipment layout, while clip contacts support PCB or screw-fixed assemblies developed by the equipment manufacturer.
04
Motor-control assemblies
For aM fuse links, choose a holder with the matching size and ratings, then coordinate the separate overload protection required by the motor circuit.
05
Power electronics
BAC open bases are especially suited to semiconductor fuse applications with higher power dissipation, where open mounting supports heat release and access to the fuse link.
06
Class CC and custom designs
PMX CC provides a dedicated 600 V Class CC format. Ø10 clip contacts serve equipment designs that require separate screw-fixed or PCB contacts rather than an enclosed holder.
Why choose DF Electric cylindrical fuse holders and bases
The range combines multiple mounting formats with coordinated sizes, accessories and documented product ratings for industrial low-voltage equipment.
01
Coordinated fuse and holder formats
The CYLINDRICAL range brings together fuse links, holders, bases and accessories around published sizes and ratings, simplifying the selection of a compatible combination.
02
A range for different panel layouts
PME, PMX and PMC Compact address standard, modular and space-constrained DIN-rail layouts, while PMX CC provides a dedicated Class CC option.
03
Open and equipment-level mounting
BAC bases provide open DIN-rail or screw mounting. Ø10 clip contacts extend the range to PCB and screw-fixed equipment assemblies.
04
Indication and monitoring options
Fusing indicators and microswitch arrangements are available on specified PMX, PMX CC and BAC references. Availability depends on size and product version.
05
Materials and thermal design
Published product data identifies silver-plated contacts, temperature-resistant materials and ventilation features on the relevant families, supporting demanding industrial use.
06
Documented standards and accessories
IEC/EN 60269 requirements apply across the main industrial families, with UL and CSA references available on specified products. Always check the exact order reference and technical sheet.
Need to know
What products are included in the cylindrical fuse holder and base range?
The range includes PME, PMX and PMC Compact industrial holders, PMX CC holders, BAC open bases and clip contacts for Ø10 fuse links. Each family addresses a different combination of size, mounting, pole configuration and monitoring requirement.
What is the difference between a fuse link and a fuse holder?
The fuse link provides the electrical protection characteristic and interrupts excessive current. The holder or base provides the correctly rated connection, mounting and access for that fuse link. Both must be selected and checked together.
How do I choose the right cylindrical fuse holder?
Match the exact fuse-link size and category, then check circuit voltage, holder rated current, pole arrangement, mounting, indication or monitoring, protection degree, ambient conditions and the permitted fuse power loss in the selected holder.
What is the difference between PME, PMX and PMC Compact?
PME is a 10×38 mm family for straightforward DIN-rail installation. PMX covers the broadest range of sizes and options. PMC Compact focuses on reduced dimensions, including a 1P + N configuration in one module.
When should a BAC open fuse base be used?
BAC bases are intended for open mounting, particularly in semiconductor fuse applications with higher dissipated power. They are available for 10×38, 14×51 and 22×58 mm fuse links and are rated IP00.
What are PMX CC fuse holders used for?
PMX CC holders are dedicated to cylindrical Class CC fuse links. Published references are rated 30 A and 600 V, in 1P, 2P and 3P configurations with or without a fusing indicator.
Can the same holder be used with gG and aM fuse links?
PME, PMX, PMC and BAC product documentation identifies compatible gG and aM fuse links for the relevant sizes. Compatibility still depends on the exact size, voltage, current, power loss and order reference.
What are Ø10 clip contacts used for?
They provide separate contacts for Ø10 cylindrical gG fuse links in screw-fixed or PCB assemblies. The catalogue lists ratings up to 1500 V AC/DC and 25 A; the finished equipment must provide the required insulation and enclosure protection.
Does the holder determine the circuit protection characteristic?
No. The protection category and time-current behaviour come from the selected fuse link. The holder must be compatible and correctly rated, but it does not replace the protection coordination required for the circuit.


