Skip to main content

RAPIDPLUS semiconductor fuse links

RAPIDPLUS semiconductor fuse links are high-speed protective devices for power electronics. gS and gR ranges clear overloads and short circuits; aR ranges provide short-circuit protection.

DF Electric’s RAPIDPLUS family combines cylindrical, NH and square-body fuse links for semiconductor protection in power rectifiers, UPS systems, converters, motor drives, soft starters, solid-state relays, photovoltaic inverters and welding equipment. The family includes gS and gR full-range fuse links for overload and short-circuit protection, plus aR fuse links for short-circuit protection of power semiconductor devices. Available ratings extend from compact 10 × 38 and 10 × 85 cylindrical formats to NH and SQB fuse links for higher current applications. Electrical maxima do not apply to every fuse link. Select the protection class and format first, then verify rated voltage, current, breaking capacity, I²t, power dissipation, dimensions, temperature derating, connection and coordination in the technical data for the chosen reference. Explore the seven ranges below and compare the published ratings that define their intended use.

0x85 gS cylindrical semiconductor fuse link 1000V AC/DC (RAPIDPLUS)

The compact 10 × 85 gS range provides full-range protection at 1000 V AC/DC. Ratings from 1 to 20 A combine high-speed operation with low let-through energy. Published breaking capacities are 30 kA AC and 10 kA DC.

Main function
Protection against overloads and short circuits
Typical applications
Power electronics and renewable-energy systems up to 1000 V AC/DC
Range
10 × 85 gS 1000 V AC/DC

Cylindrical gR fuse links provide full-range protection in 10 × 38, 14 × 51 and 22 × 58 mm sizes. The range covers 1 to 100 A at 690 V AC +5% and is also rated at 440 V DC. Selected 14 × 51 and 22 × 58 ratings are available with a striker.

Main function
Protection against overloads and short circuits
Typical applications
Semiconductors, cables and switchgear in compact power-electronics assemblies
Range
10 × 38 gR
14 × 51 gR
22 × 58 gR

Cylindrical aR fuse links provide short-circuit protection for semiconductors with low I²t and reduced arc voltage. The 10 × 38, 14 × 51 and 22 × 58 mm sizes cover 1 to 100 A at 690 V AC and 700 V DC. Selected ratings are available with a striker.

Main function
Short-circuit protection for power semiconductor devices
Typical applications
High-speed semiconductor protection coordinated with overload protection
Range
10 × 38 aR
14 × 51 aR
22 × 58 aR

The NH gS 690 V AC range provides full-range protection from 20 to 630 A in NH000, NH00, NH1, NH2 and NH3 sizes. Published DC ratings are 440 V for NH000 and NH00, and 550 V for NH1, NH2 and NH3. Breaking capacity is 100 kA AC and 30 kA DC.

Main function
Protection against overloads and short circuits
Typical applications
Power conversion equipment requiring NH full-range semiconductor protection
Range
NH000 gS 690 V AC
NH00 gS 690 V AC
NH1 gS 690 V AC
NH2 gS 690 V AC
NH3 gS 690 V AC

The NH gS 800 V AC range provides full-range protection from 25 to 400 A in NH00, NH1 and NH3 sizes. Its reduced power dissipation supports use with a range of fuse bases and fuse-switch disconnectors. Rated breaking capacity is 120 kA.

Main function
Protection against overloads and short circuits
Typical applications
High-voltage AC power conversion in standard NH assemblies
Range
NH00 gS 800 V AC
NH1 gS 800 V AC
NH3 gS 800 V AC

NH aR fuse links provide short-circuit protection from 16 to 1000 A in NH000, NH1, NH2 and NH3 sizes. The range is rated at 690 V AC; published DC ratings are 440 V for NH000 and 550 V for NH1, NH2 and NH3. A trip indicator can provide visual or microswitch signalling.

Main function
Short-circuit protection for power semiconductor devices
Typical applications
Higher-current semiconductor circuits requiring NH format and indication
Range
NH000 aR
NH1 aR
NH2 aR
NH3 aR

RAPIDPLUS SQB aR fuse links provide short-circuit protection from 80 to 1400 A at 690 V AC. SQB1, SQB2 and SQB3 sizes are available with flush-end, 80 mm blade and 110 mm blade contacts. Rated breaking capacity is 120 kA.

Main function
Short-circuit protection for power semiconductor devices
Typical applications
High-current converters, drives, UPS systems and other power electronics
Range
SQB1 aR
SQB2 aR
SQB3 aR

What is the difference between gS, gR and aR semiconductor fuse links?

gS and gR fuse links provide full-range protection against overloads and short circuits. aR fuse links provide short-circuit protection for power semiconductor devices and require coordinated overload protection. Choose the class together with the required voltage, current, format, breaking capacity, I²t and installation conditions.

Comparison table

DF Electric RAPIDPLUS semiconductor fuse links

Compare the published family-level ratings, then consult the selected reference for complete technical data.

Cylindrical ranges

RAPIDPLUS 10 by 85 gS semiconductor fuse link RAPIDPLUS cylindrical gR semiconductor fuse links RAPIDPLUS cylindrical aR semiconductor fuse links
Feature 10 × 85 gS Cylindrical gR Cylindrical aR
Protection type Overloads and short circuits Overloads and short circuits Short circuits
Rated voltage 1000 V AC/DC 690 V AC +5%
440 V DC
690 V AC
700 V DC
Rated current 1–20 A 1–100 A 1–100 A
Breaking capacity 30 kA AC
10 kA DC
200 kA AC
30 kA DC
200 kA AC
30 kA DC
Sizes / versions 10 × 85 10 × 38
14 × 51
22 × 58
10 × 38
14 × 51
22 × 58
Striker option — 14 × 51 8, 10, 12, 16, 20, 25, 32, 40, 50 A
22 × 58 20, 25, 32, 40, 50, 63, 80, 100 A
14 × 51 8, 10, 12, 16, 20, 25, 32, 40, 50 A
22 × 58 20, 25, 32, 40, 50, 63, 80, 100 A

NH and square-body ranges

RAPIDPLUS NH gS fuse links 690 V AC RAPIDPLUS NH gS fuse links 800 V AC RAPIDPLUS NH aR semiconductor fuse links RAPIDPLUS SQB square-body aR fuse links
Feature NH gS
690 V AC
NH gS
800 V AC
NH aR SQB aR
Protection type Overloads and short circuits Overloads and short circuits Short circuits Short circuits
Rated voltage 690 V AC +10%
440/550 V DC1
800 V AC +10% 690 V AC +10%
440/550 V DC2
690 V AC
Rated current 20–630 A 25–400 A 16–1000 A 80–1400 A
Breaking capacity 100 kA AC
30 kA DC
120 kA 120 kA AC
30 kA DC
120 kA
Sizes / versions NH000
NH00
NH1
NH2
NH3
NH00
NH1
NH3
NH000
NH1
NH2
NH3
SQB1
SQB2
SQB3
Connection / indication NH blade contacts NH blade contacts NH blade contacts
Trip indicator
Optional microswitch
Flush end contacts
80 mm blade contacts
110 mm blade contacts

1 NH gS 690 V AC. NH000 and NH00 are rated at 440 V DC; NH1, NH2 and NH3 at 550 V DC.
2 NH aR. NH000 is rated at 440 V DC; NH1, NH2 and NH3 at 550 V DC.
Ratings are family-level summaries. Check the technical data, time-current curves, I²t, power dissipation, dimensions, temperature derating, connection requirements and coordination for the selected reference.


Applications of semiconductor fuse links

RAPIDPLUS fuse links protect power semiconductor devices and associated circuits across industrial and renewable-energy power conversion. The suitability of a specific reference depends on the protection class, electrical ratings, fault conditions and installation requirements.

01

Power rectifiers and converters

High-speed fuse links limit current and let-through energy during faults in rectifiers and industrial converters. Select the protection class and I²t required by the semiconductor devices and circuit.

02

UPS and critical power systems

RAPIDPLUS ranges support semiconductor protection in UPS equipment and critical power conversion. Coordination must account for operating current, prospective fault current and continuity requirements.

03

Motor drives and soft starters

Semiconductor fuse links protect diodes, thyristors, triacs and IGBTs used in AC and DC motor drives and soft starters. Selection must allow normal operating conditions while clearing the specified faults.

04

Photovoltaic inverters

The range includes options for power semiconductor protection in photovoltaic inverters. The 10 × 85 gS fuse link provides a compact 1000 V AC/DC option; suitability still depends on the actual circuit and coordination study.

05

Solid-state relays

Fast fault clearing and low let-through energy support protection of semiconductor switching devices used in solid-state relays. Verify current rating, I²t and overload coordination for the specific assembly.

06

Welding inverters

RAPIDPLUS fuse links can protect power semiconductor devices in welding inverters. Correct selection considers the duty cycle, fault level, thermal conditions and protection required by the semiconductor manufacturer.


Why choose DF Electric RAPIDPLUS semiconductor fuse links

RAPIDPLUS combines high-speed semiconductor protection with cylindrical, NH and square-body formats. Seven published ranges cover different protection classes, voltages, currents, breaking capacities and connection requirements, supported by reference-specific technical data.

01

High-speed current limitation

The ranges are designed for rapid fault clearing, low I²t and controlled let-through energy to reduce thermal and electrodynamic stress on sensitive power semiconductor devices.

02

gS, gR and aR classes

Full-range gS and gR options clear overloads and short circuits. Partial-range aR options focus on semiconductor short-circuit protection and are coordinated with overload protection.

03

Three fuse-link formats

Cylindrical, NH and square-body formats provide compact through high-current options. Available dimensions, contacts and indication features depend on the selected range.

04

Broad electrical coverage

Published options extend from 1 A cylindrical ratings to 1400 A SQB ratings, with AC and DC voltage capabilities defined by range. Maxima are not interchangeable between versions.

05

High breaking capacities

Published breaking capacities reach 200 kA AC in the cylindrical gR and aR ranges. The applicable value must be checked at the specified voltage and for the selected reference.

06

Reference-specific documentation

Product pages and data sheets provide ratings, dimensions, characteristic curves, I²t and power-dissipation data. Published ranges reference IEC/EN 60269-1 and IEC/EN 60269-4.


Need to know

What products are included in the RAPIDPLUS family?

The family includes a 10 × 85 gS fuse link, cylindrical gR and aR ranges, NH gS ranges at 690 and 800 V AC, NH aR fuse links and SQB square-body aR fuse links. Available sizes, currents, contacts and indication options depend on the range.

What is the difference between gS, gR and aR fuse links?

DF Electric describes its gS and gR ranges as full-range fuse links that clear overloads and short circuits. aR fuse links provide short-circuit protection for power semiconductor devices and require coordinated overload protection. Voltage, current, I²t, breaking capacity and format must also be matched to the application.

How do I select a semiconductor fuse link?

Start with the required protection class and fuse format. Then check maximum operating voltage, continuous current, prospective fault current, breaking capacity, time-current curves, I²t, power dissipation, temperature, dimensions, connection and coordination with the semiconductor device and the rest of the circuit.

Which RAPIDPLUS fuse link is rated at 1000 V AC/DC?

The RAPIDPLUS 10 × 85 gS cylindrical fuse link is rated at 1000 V AC/DC and covers 1 to 20 A. Its published breaking capacity is 30 kA AC and 10 kA DC. Confirm the selected rating and application conditions in its technical data.

Can RAPIDPLUS fuse links be used in photovoltaic inverters?

Yes. DF Electric lists photovoltaic inverters among the typical applications for its semiconductor fuse ranges. Suitability depends on the circuit voltage, current, fault level, semiconductor characteristics and the required protection class; a product should not be selected solely from the application name.

What are the striker, trip indicator and microswitch used for?

Selected cylindrical ratings are available with a striker for use with compatible fuse bases and microswitches. NH aR fuse links include a trip indicator that can provide visual indication or operate a microswitch mounted on the fuse link. Availability must be checked for the selected reference.

Why is I²t important for semiconductor protection?

I²t expresses the energy let through during fuse operation. Lower let-through energy can reduce thermal and electrodynamic stress on diodes, thyristors, triacs, IGBTs and associated equipment. Compare the fuse data with the limits specified for the protected device and circuit.

How does ambient temperature affect fuse-link selection?

The RAPIDPLUS range pages require current derating when ambient temperature exceeds 25 °C. Use the correction factors and operating conditions stated for the selected fuse link; the published operating-temperature range does not mean full rated current is available at every temperature.

Which standards are listed for RAPIDPLUS semiconductor fuse links?

The published ranges reference IEC/EN 60269-1 and IEC/EN 60269-4. Selected cylindrical and SQB ranges also list UL248-1 and UL248-13. Consult the technical documentation for the chosen reference to confirm the applicable standards and certifications.

Smart solutions for electrical protection

We are a company specialized in the manufacturing of fuse links, fuse holders and control transformers since 1987. Presently the company is leading the Spanish market and is also very active in many export markets due to its competitive range of products. Our products are well known in Europe, Africa, Middle East and Asia and comply with the most common international standards such as IEC, EN, UL and CSA and bear the CE mark. The company is ISO 9001: 2015 approved.

Fuse links, fuse holders & bases and low voltage transformers designed and developed with our own manufacturing technology. Our vision for the future is to attain a leadership position in the manufacturing and commercialisation of our products, strengthening our global presence.

Production process is totally integrated into our facilities

Our manufacturing processes are highly automated, fruit of the internally developed technological level, and specifically applied to each production line. From the manufacturing of each product until its final assembly we try to obtain maximum efficiency applying ongoing improvement and respecting the most demanding standards.

Our company applies an integrated quality, environmental and prevention policy based on the satisfaction of our clients and suppliers as the fundamental objective.

Global presence in 68 countries

Get in touch

If you would like more information or have any questions on any of our products or services, please do not hesitate to contact us. We would be happy to assist you in any way we can. We appreciate your feedback.

International

export@dfelectric.es

T +34 93 475 08 64
F +34 93 480 07 75

Spain

comercial@dfelectric.es

T +34 93 475 08 64
F +34 93 480 07 76

Follow us

Privacy Preference Center