Range
| SIZE | Un | In | POLES | MODULES | REFERENCE | |
|---|---|---|---|---|---|---|
WITHOUT INDICATOR |
WITH INDICATOR |
|||||
| 8x32 | 400V AC/DC | 25A | 1P | 1 | 485001 | 485008 |
| 1P + N | 2 | 485003 | 485009 | |||
| 2P | 2 | 485004 | 485010 | |||
| 3P | 3 | 485005 | 485011 | |||
| 3P + N | 4 | 485006 | 485012 | |||
| 4P | 4 | 485007 | 485013 | |||
Technical data
| Rated current | 25A |
| Rated voltage | 400V AC/DC |
| Rated power dissipation | 2,5W |
| Maximum power dissipation | 3W |
| Power dissipation per pole | 80% In 0,16W 100% In 0,25W |
| Utilization category (EN 60947-3) | 400V AC-22B |
| Pollution degree | 3 |
| Protection index * | IP20 |
| Rated impulse withstand voltage | 6kV U imp |
| Ambient temperature of service | -40°C ... 70°C (with carrier operation) -50°C ... 80°C (without carrier operation) |
| Storage temperature | -50°C ... 80°C |
| * To obtain an IP20 rating with cable protection of Ø ≤4.5mm, use the special protection accessory. | |
Standards
IEC/EN 60269-1
IEC/EN 60269-2
Dimensions
| 1P | N | 1P + N | 2P | 3P | 3P + N | 4P |
| 57gr | 60gr | 117gr | 114gr | 171gr | 231gr | 228gr |
Accessories
Multipolar assembly
Standard system by DF Electric: 2 clips and 1 pin for each union between poles.
| REFERENCE | DESCRIPTION |
| 480005 | Pins for multipole assembly |
| 485050 | Handle ties for multipole assembly |
Identification by label
Open the label holder part with the fuse holder closed, put on the label and close it. Label measures: 11x9mm.
Special IP20 protection
The accessory mut be positioned in the wire entries, if it’s neccesary to achieve the IP20 degree of protection with thin wires.
| REFERENCE | DESCRIPTION |
| 485052 | Special IP20 protection accessory |
Phase separators accessory
The accessory increases the distance between phases in multipolar asemblies.
| REFERENCE | DESCRIPTION |
| 485053 | Phase Separator accessory |
Screws protection accessory
Protection accesory to avoid the screws manipulation and improve the protection degree.
| REFERENCE | DESCRIPTION |
| 485656 | Screws protection accessory |
Lock of the fuse holder
Systems to avoid the operation and connection when the fuse holder is open or closed.
| REFERENCE | DESCRIPTION |
| 485051 | Lock accessory |
Fusing Indicator replacement instructions
Compatible
 |
 |
|
| 8x32 Cylindrical gG fuse link | 8x32 Cylindrical aM fuse link | |
| U | 400V | 400V |
| In | 0,5A...20A | 1A...10A |
| Breaking capacity | 20kA | 20kA |
Other sizes
 |
 |
 |
|
|
| NEW | ||||
 |
 |
 |
 |
|
|---|---|---|---|---|
| U | 690V AC 750V DC |
690V AC 750V DC |
690V AC 750V DC |
1000V AC/DC |
| IN | 32A | 50A | 100A | 100A |
| Certificados |      |
|
|
|